| IKO PHS22EC Spherical Plain Bearings - Rod Ends | Bearing Outside Diameter, Nominal(Do):165.000; Bore Diameter (mm):160; OD Chamfer Length (Co):1.800; Material:Wrapped bronze with; ID Chamfer Length (Ci):0.600; Shaft Dia., Nominal (d):160.0000; Bearing Length, Nominal (B):70.000; Outer Diameter (mm):165; Shaft Size (ds) - 160 -0.145 / -0.185:160 0.145 / 0.185; ID Chamfer Angle (B deg.):45; |
| 0.394 Inch | 10 Millimeter x 0.669 Inch | 17 Millimeter x 0.472 Inch | 12 Millimeter IKO TAF101712 Needle Non Thrust Roller Bearings | d1:77,8 mm; Da min:85 mm; Outer Diameter (mm):95; db min:67 mm; T:23 mm; Basic static load rating (C0):122 kN; Basic dynamic load rating (C):95 kN; Size (mm):0.394 Inch | 10 Millimeter x 0.669 Inch | 17 Millimeter x 0.472 Inch | 12 Millimeter ; rb max.:1,5 mm; Cb min.:5,5 mm; |
| IKO NAU4920UU Roller Bearings | G2 - Heat Generation Factor (Rib-Roller End):86.6; R - Cone Frontface To Clear Radius1:0.030 in; C - Cup Width:1.0938 in; G1 - Heat Generation Factor (Roller-Raceway)11:279; Aa - Cage-Cone Backface Clearance:0 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:24800 lbf; Y2 - ISO Factor10:3.02; d:4.7500 in; Bearing Weight:11.9 lb; Ab - Cage-Cone Frontface Clearance:0.04 in; |
| IKO CFES6UUR Cam Follower and Track Roller - Stud Type | Grease Lubrication - T Seal:1200 rpm; Float:0.083 in; Engineering Group:Mounted Bearing; Y1 - Geometry Factor:2.55; Grease Lubrication - M/N Seal:900 rpm; Adapter Sleeve Axial Movement Min:0.03 in; C0 - Static Load:147000 lb; Dimension D:8.5000 in; UPC Code:0883450007122; Dimension E:7.75 in; |
| 2.165 Inch | 55 Millimeter x 2.48 Inch | 63 Millimeter x 0.787 Inch | 20 Millimeter IKO TLA5520Z Needle Non Thrust Roller Bearings | d:15,875 mm; ra max.:0,6 mm; Fw:22,225 mm; Width (mm):19,3; B:19,3 mm; Weight:0,099 Kg; Outer Diameter (mm):34,925; Da max.:30 mm; da min.:21 mm; da max:21,2 mm; Size (mm):2.165 Inch | 55 Millimeter x 2.48 Inch | 63 Millimeter x 0.787 Inch | 20 Millimeter ; |
| IKO GS75100 Thrust Roller Bearing | (Grease) Lubrication Speed:1100 r/min; Bore Diameter (mm):200; Width (mm):42; d:200 mm; Basic dynamic load rating (C):257 kN; Weight:3,56 Kg; Outer Diameter (mm):255; Bearing number:NA2200; r:1,35 mm; Size (mm):200x255x42; |
| IKO NART45R Cam Follower and Track Roller - Yoke Type | Foot Height H1:23.8 mm; Dimension T:1.189 in; Center of Bearing from End S:25.4 mm; Inside Ring Outside Diameter:3.011 in; Bolt Hole Spacing J:188.1 mm; Dimension L1:79.9 mm; Housing Style:Two-Bolt Pillow Bloc; Bolt Hole Width N:18.3 mm; Total Height H2:138.9 mm; Total Width A:2.374 in; |
| IKO CF24UU Cam Follower and Track Roller - Stud Type | ra max.:0,15 mm; a:0,78 mm; D1:11,15 mm; rn:0,1 mm; Bearing number:F-SC6A06ZZ1NR; Cz:0,6 mm; b:0,6 mm; (Grease) Lubrication Speed:40000 r/min; Basic static load rating (C0):0,365 kN; |