IKO CR30B Cam Follower and Track Roller - Stud Type

No.	Brand	L	T	e	C	B	a	J	f
KT404513	IKO	-	-	-	2,06 mm	-	-	-	1,7 mm
SB50A	IKO	-	-	-	-	-	-	-	-
TAF475720	IKO	-	-	-	46 mm	-	-	-	-
IRB88	IKO	-	-	-	-	-	-	-	-
NART20VR	IKO	-	-	-	-	-	-	-	-
NART45R	IKO	-	-	-	-	-	-	-	-
LRT172232	IKO	-	-	-	-	-	-	-	-
CRE24BUU	IKO	-	-	-	-	-	-	-	-
TLAM2512	IKO	-	39.688 mm	-	30.162 mm	-	2.5 mm	-	-
RNA4903UU	IKO	-	-	-	-	-	-	-	-
TA 2230 Z IKO	IKO	-	-	-	69 mm	-	-	-	-
KT162013	IKO	-	-	-	-	-	-	-	-
BHAM1412	IKO	-	-	-	20 mm	-	-	-	-
RNAFW182620	IKO	-	-	-	118 mm	118 mm	-	-	-
LRT8510035	IKO	-	-	-	-	-	-	-	-
NAST30ZZR	IKO	-	-	-	-	-	-	-	-
CFES6UUR	IKO	-	-	-	-	-	-	-	-
IRT712	IKO	-	-	-	-	-	-	-	-
CF24UU	IKO	-	-	-	-	-	0,78 mm	-	-
TAF101712	IKO	-	23 mm	-	-	-	-	-	-
TLA1412Z	IKO	-	-	-	-	-	-	-	-
RNA4912	IKO	-	60 mm	-	-	-	-	-	-

IKO CFE6UU Cam Follower and Track Roller - Stud Type	(Grease) Lubrication Speed:10710 r/min; B:20 mm; Basic dynamic load rating (C):54 kN; Outer Diameter (mm):62; Weight:0,27 Kg; Basic static load rating (C0):48 kN; Bearing number:NUP 2206; Width (mm):20; d:30 mm; Bore Diameter (mm):30;
0.472 Inch \| 12 Millimeter x 0.63 Inch \| 16 Millimeter x 0.394 Inch \| 10 Millimeter IKO TLAM1210 Needle Non Thrust Roller Bearings	Wall Thickness (S3):0.063; Bearing number:AST50 14FIB12; Average Clearance (Cd):0.0024; Material:Carbon steel shell w; Flange Dia. (Dfl pm 0.5):1.200; Shaft Dia., Nominal (d):0.8750; OD Chamfer Length (Co):0.026; Bearing Length, Nominal (B):0.750; Bearing Length Tolerance (B tol.) - +.010 / -0.010:+.010 / 0.010; Flange Radius (rfl):0.040; Size (mm):0.472 Inch \| 12 Millimeter x 0.63 Inch \| 16 Millimeter x 0.394 Inch \| 10 Millimeter ;
1.625 Inch \| 41.275 Millimeter x 2 Inch \| 50.8 Millimeter x 0.5 Inch \| 12.7 Millimeter IKO BA268ZOH Needle Non Thrust Roller Bearings	Bore Diameter (mm):35; Ew:40 mm; Brand:Timken; Bearing number:K35X40X19F,ZB2; Fw:35 mm; Outer Diameter (mm):40; Weight:0,025 Kg; Basic static load rating (C0):43,2 kN; Basic dynamic load rating (C):23,2 kN; (Grease) Lubrication Speed:7900 r/min; Size (mm):1.625 Inch \| 41.275 Millimeter x 2 Inch \| 50.8 Millimeter x 0.5 Inch \| 12.7 Millimeter ;
2.362 Inch \| 60 Millimeter x 2.756 Inch \| 70 Millimeter x 1.004 Inch \| 25.5 Millimeter IKO IRT6025 Needle Non Thrust Roller Bearings	D:152,4 mm; (Grease) Lubrication Speed:2500 r/min; B:41,275 mm; Basic dynamic load rating (C):206 kN; d:82,55 mm; Bore Diameter (mm):82,55; Size (mm):2.362 Inch \| 60 Millimeter x 2.756 Inch \| 70 Millimeter x 1.004 Inch \| 25.5 Millimeter ; Brand:FBJ; Weight:3,15 Kg; Outer Diameter (mm):152,4;
0.315 Inch \| 8 Millimeter x 0.591 Inch \| 15 Millimeter x 0.472 Inch \| 12 Millimeter IKO TAF81512 Needle Non Thrust Roller Bearings	Basic dynamic load rating (C):31,85 kN; T min.:-20 °C; J2:18,3 mm; B:43,7 mm; d:41,275 mm; S:9.5 mm; J:3,18 mm; e:1,5 mm; B1:30,2 mm; D2:63,5 mm; Size (mm):0.315 Inch \| 8 Millimeter x 0.591 Inch \| 15 Millimeter x 0.472 Inch \| 12 Millimeter ;
IKO NAST30ZZR Cam Follower and Track Roller - Yoke Type	Bore Type:Cylindrical Bore; Roller Profile:Symmetric; Groove Width A:45 mm; Axial Load Factor Y1:2.20; Dynamic Load Rating:13,500,000 N; Weight:1070.000 kg; Fillet Radius/Chamfer:7.5 mm; Axial Load Factor Y2:3.27; D:1030 mm; Constant e:0.31;
IKO NAU4920UU Roller Bearings	G2 - Heat Generation Factor (Rib-Roller End):86.6; R - Cone Frontface To Clear Radius1:0.030 in; C - Cup Width:1.0938 in; G1 - Heat Generation Factor (Roller-Raceway)11:279; Aa - Cage-Cone Backface Clearance:0 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:24800 lbf; Y2 - ISO Factor10:3.02; d:4.7500 in; Bearing Weight:11.9 lb; Ab - Cage-Cone Frontface Clearance:0.04 in;
4.724 Inch \| 120 Millimeter x 5.315 Inch \| 135 Millimeter x 1.772 Inch \| 45 Millimeter IKO LRT12013545 Needle Non Thrust Roller Bearings	Dynamic Load Rating:58,000 N; r1:1.1 mm; D:100 mm; Outside Ring Inside Diameter:88.5 mm; Da (max):91.5 mm; Configuration:Single Row; da (min):63.5 mm; Limiting Speed - Oil:7,500 rpm; Limiting Speed - Grease:6,300 rpm; ra1 (max):1 mm; Size (mm):4.724 Inch \| 120 Millimeter x 5.315 Inch \| 135 Millimeter x 1.772 Inch \| 45 Millimeter ;

IKO CR30B Cam Follower and Track Roller - Stud Type Video

CR30B bearing, Cam followers 19.05x47.625x25.4 for Marshall ...

Reference From IKO CR30B, Flat Cam Follower-Hex Head - 1.8750 inch Roller Diameter, 1.0000 inch Roller Wide, 0.7500 inch Stud Diameter, 1.7500 inch Stud ...

CR30B | Compactors | Overview | Volvo Construction Equipment

Introducing the CR30B Combination roller from Volvo, a highly efficient machine designed to increase performance and reduce fuel consumption on small scale ...

CR30B – IKO Inch Series Cam Followers CR – Caged Type ...

... bearing that incorporates needle style rollers between a stud and a thick outer ring. CR30B – IKO Inch Series Cam Followers CR – Caged Type hexagon hole ...

IKO Cam Followers (CR30B)

THIS LISTING IS FOR ( 1 ) - IKO CR30B Inch - Heavy Duty, Cam Follower, UPC: 4549557015670, FACTORY NEW! Product details.

CR30B - IKO Inch Series Cam Followers CR - Quality ...

CR, 30, B. Inch Series, Size, High Carbon Steel, Cage Type, Hexagon Socket, Shield Type, Cylindrical Outer Ring. Product Information. Brand: IKO Brand Logo

CR30B - IKO | Cam Follower and Track Roller - Stud Type ...

IKO IKO. CR30B · 1-7/8" Roller Diameter; 1" Roller Width; Flat Roller Surface Profile; 3/4" Stud Diameter; 3/4-16 Thread Size; Standard Stud Stud Profile; Metal ...