No. | Brand | D | L | S | P | G | f | E | b |
UCTB205-15NP | AMI | - | - | 30.9 mm | - | R1/8" | - | - | - |
UEWTPL207-23MZ20CB | AMI | - | - | - | - | - | - | - | - |
UCLP201C4HR5 | AMI | - | 118 mm | 18.8 mm | - | R1/8" | - | - | - |
BF206-19 | AMI | - | - | - | - | - | - | - | - |
UCAO315-48 | AMI | - | - | - | - | - | - | - | - |
UCT316 | AMI | - | 138 mm | - | - | - | - | - | - |
BPPL6-19MZ2CW | AMI | - | - | - | - | M6x1 | - | - | - |
BNFL4-12MZ2W | AMI | - | - | - | - | - | - | - | - |
UCLP210-32C | AMI | - | - | - | - | - | - | - | - |
UETB207-20NP | AMI | - | - | - | - | - | - | - | - |
UCST208-25CE | AMI | - | - | - | - | - | - | - | - |
KHPW207 | AMI | - | - | - | - | - | - | - | - |
MUP000CE | AMI | - | 163 mm | - | - | - | - | - | - |
BLX5-16W | AMI | 19 mm | - | - | - | - | - | - | - |
UEP208TC | AMI | - | 116 mm | 19 mm | - | R1/8" | - | - | - |
UEF208-24TC | AMI | 130 mm | - | 26 mm | - | M12x1,25 | - | - | - |
UCPPL207-20MZ20RFW | AMI | - | - | - | - | - | - | - | - |
MUCWTPL207-23W | AMI | 2.4404 in | - | - | - | - | - | - | - |
UCMST205MZ2 | AMI | 160 mm | - | - | - | - | - | - | - |
UEFT211TC | AMI | - | - | - | - | - | - | - | - |
UEFCS206NP | AMI | - | - | - | - | - | - | - | - |
CUCFC201CE | AMI | - | - | - | - | - | - | - | - |
UCC204-12 | AMI | - | 205.00 mm | - | - | - | - | - | - |
CUCT216CE | AMI | - | - | - | - | - | - | - | - |
UCPPL208-24MZ20RFCW | AMI | - | 370 mm | 51 mm | - | M10x1 | - | - | - |
UCHPL206-17MZ2W | AMI | - | - | - | - | - | - | - | 5.4 mm |
UETBL205-16MZ20RFB | AMI | - | - | - | - | - | - | - | - |
U000 | AMI | - | - | - | - | - | - | - | - |
UCP204-12NPMZ2 | AMI | - | - | - | - | - | - | - | - |
UCP206-19 | AMI | - | - | - | - | - | - | - | - |
AMI MUCECH210-30NPRF Hanger Unit Bearings | s1:16 mm; G:R1/8"; d:35 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:US207G2; Weight:1.12 kg; A:33.7 mm; A1:12.5 mm; T min.:-20 °C; J:130 mm; |
AMI UELC209-28 Cartridge Unit Bearings | da min:45.5 mm; D6:51.8 mm; Radial rigidity:278 N/µm; Dynamic load, C:20.2 kN; Min operating temperature, Tmin:-30 °C; Characteristic cage frequency, FTF:0.43 Hz; Mass:0.18 kg; Brand:SNR; d1:49.2 mm; d:40 mm; |
AMI KHPP205-14 Pillow Block Bearings | Recommended tightening torque for set screw:5.5 Nm; G:M6x1; B1:43.5 mm; C1:4.4 mm; r:0.6; D:47 mm; T max.:100 °C; SW:3 mm; C:16 mm; C0:6.65 kN; |
AMI UEWTPL207-23MZ20CB Mounted Units & Inserts | Shape:Flange Type; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Width T(mm):35 ~ 70; Bearing Retained:Yes (with retaining; Bearing Part Number:6903; Bearing I.D. d(mm):17; Flange Shape:Round Type; |
AMI UCST206-20NPMZ20RF Mounted Units & Inserts | L1:40 mm; d:44.45 mm; Weight:2.18 kg; T min.:-20 °C; Designation of housing:PG209N-; A1:33 mm; H1:20 mm; H:53.9 mm; A:54 mm; Recommended tightening torque for set screw:8 Nm; |
AMI CUCP213-40C Pillow Block Bearings | Housing Style:Four-Bolt Square Fla; Center of Bearing from Housing End A2:16.00 mm; Grease Nipple Size:A-1/4-2B UNF; Flange Thickness A1:13.00 mm; Housing Width A:27.00 mm; Weight:1.9 lb; Locking Style:Adapter Sleeve Locki; Dimension B1:1.378 in; Bearing Unit - Adapter Sleeve:UK205 - H2305; Static Load Rating:1765 lbf; |
AMI UETBL205-16W Pillow Block Bearings | Ab - Cage-Cone Frontface Clearance:0.2 in; da - Cone Frontface Backing Diameter:3.1 in; Series:78000; R - Cone Backface To Clear Radius3:0.09 in; C0 - Static Radial Rating:43400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:17500 lbf; G1 - Heat Generation Factor (Roller-Raceway):62.6; B - Cone Width:1.3085 in; G2 - Heat Generation Factor (Rib-Roller End):19.1; Aa - Cage-Cone Backface Clearance:0.24 in; |
AMI MUCTB206TC Pillow Block Bearings | G:M6x1; S:9.5 mm; d1:51.1 mm; A2:48.4 mm; H:161 mm; J1:66 mm; B1:38.9 mm; T max.:200 °C; N:15mm; s1:30.2 mm; |
AMI CUCT216CE Take Up Unit Bearings Video