| A16-67P2 Rotek Slewing Ring Bearings | RG:1/4-28 UNF; Basic static load rating C0:21.6 kN; A3:3.2 mm; J6:120.5 mm; A5:26.5 mm; H:178.5 mm; Rα:45 °; R1:24.5 mm; J7:18 mm; N:16 mm; GN:1/4-28 SAE-LT; N4:2 mm; A1:14 mm; s1:30.2 mm; B:49.2 mm; d:41.275 mm; Housing material:Cast iron; Hexagonal key size for grub screw N:3.969 mm; Fatigue load limit Pu:0.915 kN; SWN:7 mm; |
| 62.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:186 kN; R:140 mm; Mass bearing (including seat washer where applicable):4.85 kg; Fatigue load limit Pu:17 kN; D1 ≈:133 mm; Da max.:160 mm; D2:160 mm; d:130 mm; r1,2 min.:1.5 mm; C:17 mm; Limiting speed:1800 r/min; H1:53 mm; H:47.9 mm; D:190 mm; d1 ≈:187 mm; Minimum load factor A:1.8; Reference speed:1300 r/min; s:67 mm; D3:195 mm; ra max.:1 mm; |
| 161.20.0630.890.11.1503 Standard 5 Slewing Ring Bearings | Fatigue load limit Pu:2900 kN; r3,4 min.:7.5 mm; C:650 mm; Basic dynamic load rating C:18300 kN; Design variant/feature:BC4.10/W33WI; α:20 °; Calculation factor kr:680; D:900 mm; D1 ≈:832.4 mm; b:16.7 mm; Mass bearing:1260 kg; B:650 mm; F:704 mm; d:650 mm; K:9 mm; Basic static load rating C0:41500 kN; r1,2 min.:20 mm; |
| 230.20.0500.503 Type 21/650. Standard 5 Slewing Ring Bearings | Minimum axial load factor A:0.187; D1:78 mm; Basic static load rating C0:1530 kN; Basic dynamic load rating C:400 kN; Fatigue load limit Pu:156 kN; H:51 mm; ra max.:2 mm; Limiting speed:1900 r/min; d:75 mm; da min.:156 mm; Da max.:84 mm; r1,2 min.:2 mm; B:17 mm; Reference speed:950 r/min; Mass bearing:5.96 kg; D:160 mm; d1:160 mm; |
| 61.25.0764.103.11.1504 Standard 5 Slewing Ring Bearings | D:145 mm; Fatigue load limit Pu:65.5 kN; d1:145 mm; Mass bearing:1.04 kg; Da max.:114 mm; D1:112 mm; B:7 mm; r1,2 min.:1 mm; d:110 mm; Basic static load rating C0:680 kN; ra max.:1 mm; H:25 mm; Limiting speed:2200 r/min; Minimum axial load factor A:0.037; Basic dynamic load rating C:163 kN; Reference speed:1100 r/min; da min.:141 mm; |
| 3R8-79N9 Rotek Slewing Ring Bearings | A2:165.1 mm; Eye bolt:2 x 3/8-16 UNC; Ca:62.89 mm; L:419.1 mm; Initial grease fill:232.47 g; Cap bolt:5/8-11 UNC; P150°:59.6 kN; P90°:107 kN; Cap bolt recommended tightening torque:298.3 N·m; P180°:72.5 kN; P120°:66.7 kN; R2:31.75 mm; Labyrinth ring:2 x LOR 110; S:4.763 mm; Da:200 mm; ba:50.006 mm; H:244.475 mm; Housing:SSAFS 522; Cap bolt, SAE grade:8; P60°:178 kN; |
| W14-60P1 Rotek Slewing Ring Bearings | B:28 mm; M1:5 mm; Hexagonal head bolt:M 10x20; M:15 mm; Spring washer in accordance with DIN 128:A 10; M3:12 mm; Mass locking clip:0.055 kg; M2:24 mm; |
| A18-60P1B Rotek Slewing Ring Bearings | d:100; KBRG:4155; db min:111; Prod_Type3:CRB_SR_NJ; D_a max:169; DA_:22; C:249; GRS rpm:3600; DI_:119; SDM_:141; DE_:163; Z_:17; D_:180; hidTable:ecat_NSCLDR; r:2.1; SBRG:2; r1:2.1; mass:3.88; rb:2; yobi:NJ220EM; |
| 231.20.0800.503 Type 21/950.1 Standard 5 Slewing Ring Bearings | s max.:0.5 mm; Da:26.3 mm; d:17 mm; Limiting speed:20000 r/min; Mass bearing:0.042 kg; E:26 mm; da:25.6 mm; D:30 mm; Reference speed:18000 r/min; Basic static load rating C0:16.3 kN; F:22 mm; ra max.:0.3 mm; db:21.5 mm; r1,2 min.:0.3 mm; Fatigue load limit Pu:1.86 kN; Basic dynamic load rating C:10.1 kN; Db:22.4 mm; B:13 mm; |
| 232.20.0600.013 Type 21/750.2 Standard 5 Slewing Ring Bearings | KBRG:1352; r:1.5; X1:1; d:65; GRS rpm:4800; D_:120; C:31; CAng:6.528; Y0:3.8; B_:23; C0:12.5; groove outer:105.222; yobi:1213K; Y2:5.7; cyl dia:11.112; LangID:1; hidTable:ecat_NSSAB; X0:1; SRIX:0.05; Oil rpm:6000; |
| 161.16.0630.891.21.1503 Standard 5 Slewing Ring Bearings | H1:133.35 mm; da:104.775 mm; Cap bolt, SAE grade:5; H2:53.975 mm; Appropriate attachment bolt size G:0.75 in; PG:1/4 NPT; P120°:72.5 kN; A1:120.65 mm; Stabilizing ring:SR-24-20; PosiTrac Plus contact element:2 x B10724-113; Labyrinth ring:2 x LOR 112; J min.:336.55 mm; N1:22.225 mm; Max. speed for PosiTrac Plus seal:1350 r/min; J1:69.85 mm; Da:215.001 mm; Cap bolt recommended tightening torque:400 N·m; |
| A18-80E1 Rotek Slewing Ring Bearings | K:6 mm; r1,2 min.:3 mm; Calculation factor e:0.4; Fatigue load limit Pu:232 kN; ra max.:2.5 mm; d2 ≈:226 mm; Basic static load rating C0:2800 kN; Limiting speed:1400 r/min; Da max.:326 mm; G:Tr 210x4; Calculation factor Y0:1.6; Mass bearing + sleeve:57.5 kg; da min.:208 mm; D:340 mm; B2 ≈:171 mm; b:11.1 mm; Reference speed:1000 r/min; Calculation factor Y1:1.7; B:140 mm; Calculation factor Y2:2.5; |
| No. | Brand | M | U | G | C | B | S | b | h |
| A24-119E11A | Rotek | - | - | - | - | - | 4.763 mm | - | 60.325 mm |
| 62.20.0544.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R6-48E3B | Rotek | - | - | - | - | - | - | - | 60.325 mm |
| 60.30.0550.100.11.1504 | Standard 5 | - | - | - | - | 76 mm | - | - | - |
| 162.20.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0800.013 Type 21/950.2 | Standard 5 | - | - | - | - | - | - | - | 36.513 mm |
| 61.20.0450.100.11.1503 | Standard 5 | - | - | - | - | - | - | - | 62.706 mm |
| 231.20.0500.503 Type 21/650.1 | Standard 5 | - | - | - | - | 42.9 mm | - | - | - |
| A19-150P1 | Rotek | - | - | - | - | 185.738 mm | - | - | - |
| 61.20.0644.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| A16-152E2 | Rotek | - | 32 mm | - | - | - | - | - | - |
| 62.20.0644.575.01.1403 | Standard 5 | - | - | M 45x3 | - | 35 mm | - | - | 185 mm |
| A18-89P1 | Rotek | - | - | - | - | 65.484 mm | 0.794 mm | - | - |
| 62.20.0414.500.01.1503 | Standard 5 | - | - | - | - | - | 0.794 mm | - | - |
| 231.20.0400.503 Type 21/520.1 | Standard 5 | - | - | - | - | 31 mm | - | - | - |
| W14-71P1 | Rotek | - | - | - | - | 15 mm | - | - | - |
| 161.20.0560.890.11.1503 | Standard 5 | - | - | - | - | - | 4.763 mm | - | 34.925 mm |
| 232.20.0600.013 Type 21/750.2 | Standard 5 | - | - | - | 31 | - | - | - | - |
| 162.25.0886.891.21.1503 | Standard 5 | - | - | - | 51 | - | - | - | - |
| 61.25.0764.103.11.1504 | Standard 5 | - | - | - | - | 7 mm | - | - | - |
| 230.21.0675.013 Type 21/750. | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0600.503 Type 21/750.2 | Standard 5 | - | - | - | 163 | - | - | - | - |
| 161.20.0630.891.21.1503 | Standard 5 | - | - | - | 102 | - | - | - | - |
| 232.20.0500.013 Type 21/650.2 | Standard 5 | - | - | - | 5.7 | - | - | - | - |
| A16-86P1 | Rotek | - | - | - | - | 85.725 mm | 0.794 mm | - | - |
| 3R10-111N2F | Rotek | - | - | - | - | 92.075 mm | 0.794 mm | - | - |
| A10-47E1 | Rotek | - | - | - | - | - | - | - | - |
| 61.20.0450.101.21.1503 | Standard 5 | - | - | - | - | - | 4.763 mm | - | - |
| 62.25.0886.801.21.1504 | Standard 5 | - | - | - | 380 | - | - | - | - |
60.25.1055.500.11.1503 Standard 5 Slewing Ring Bearings Video
Compact enclosures AE – AE 1055.500 - Rittal
Supply includes: Enclosure with hinged door(s), of all-round solid construction. Gland plate(s) in enclosure base. Mounting plate. Lock: 3 mm double-bit.