| 162.20.0630.891.21.1503 Standard 5 Slewing Ring Bearings | P90°:149 kN; PG:1/4 NPT; H2:60.325 mm; R2:38.1 mm; RG:3/4 NPT; Labyrinth ring:2 x LOR 138; Cap bolt, SAE grade:5; P120°:94.3 kN; J max.:441.325 mm; N1:28.575 mm; P60°:249 kN; H1:152.4 mm; P180°:103 kN; Housing:SAF 034 KA; Mass pillow block:63.9 kg; J min.:396.875 mm; Pa:34 kN; Ca:86.614 mm; A2:193.675 mm; da:147.637 mm; |
| 161.16.0450.891.21.1503 Standard 5 Slewing Ring Bearings | da max.:60 mm; Basic dynamic load rating C:63.7 kN; Mass bearing:1.43 kg; Reference speed:13000 r/min; d1 ≈:60.16 mm; B:36 mm; da min.:54 mm; Limiting speed:9000 r/min; Calculation factor kr:0.05; Calculation factor Y2:3; Calculation factor e:0.33; D:100 mm; Calculation factor Y1:1.9; r1,2 min.:1.5 mm; Fatigue load limit Pu:1 kN; Calculation factor Y0:2; d:45 mm; ra max.:1.5 mm; Da max.:91 mm; |
| 61.20.0450.100.11.1503 Standard 5 Slewing Ring Bearings | L:749.3 mm; h:62.706 mm; End plug (suffix Y):EPR 21; Eye bolt:2 x 1/2-13 UNC; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Mass pillow block:267 kg; PG:1/4 NPT; H:419.1 mm; ba:83.344 mm; Labyrinth ring:2 x LOR 158; Cap bolt, SAE grade:8; P60°:557 kN; P180°:222 kN; P120°:207 kN; H2:85.725 mm; RG:1 NPT; H1:209.55 mm; Stabilizing ring:SR-40-34; R1:122.237 mm; |
| 231.20.0700.503 Type 21/850.1 Standard 5 Slewing Ring Bearings | Mass bearing:535 kg; Fatigue load limit Pu:765 kN; da min.:452 mm; Basic dynamic load rating C:7683 kN; B:272 mm; d:420 mm; Calculation factor Y0:1.8; Calculation factor e:0.35; da max.:500 mm; D1 ≈:676 mm; Calculation factor Y2:2.9; Calculation factor Y1:1.9; d2 ≈:500 mm; ra max.:6 mm; K:12 mm; Da max.:728 mm; D:760 mm; r1,2 min.:7.5 mm; Limiting speed:128 r/min; b:22.3 mm; |
| 60.45.0805.001.11.1504 Standard 5 Slewing Ring Bearings | d:95 mm; Mass inner ring:0.31 kg; F:105 mm; B:26 mm; r, r1,2 min.:1 mm; |
| 230.20.0500.503 Type 21/650. Standard 5 Slewing Ring Bearings | Minimum axial load factor A:0.187; D1:78 mm; Basic static load rating C0:1530 kN; Basic dynamic load rating C:400 kN; Fatigue load limit Pu:156 kN; H:51 mm; ra max.:2 mm; Limiting speed:1900 r/min; d:75 mm; da min.:156 mm; Da max.:84 mm; r1,2 min.:2 mm; B:17 mm; Reference speed:950 r/min; Mass bearing:5.96 kg; D:160 mm; d1:160 mm; |
| 232.20.0700.013 Type 21/850.2 Standard 5 Slewing Ring Bearings | SREX:0.05; hidTable:ecat_NSANGB; SRIX:0.05; DE_:141.924; da:117; C_conv:52000; SDM_:130; D_a:143; Prod_Type3:ACBB_SR_C; C0:59.5; Z_:26; SBRG:19; B_:20; ALP21:15; fo:16.7; d:110; D_:150; mass:0.867; SRE:6.19; ALPHA_:15; |
| 162.20.0450.890.11.1503 Standard 5 Slewing Ring Bearings | hidYobi:7907CTYN; ALPHA_:15; GRS rpm:18000; DE_:50.962; SBRG:19; DI_:39.038; SDM_:45; Prod_Type3:ACBB_SR_C; D_a:50; ALP21:15; a:11; r1:0.3; D_:55; hidTable:ecat_NSANGB; KBRG:7017; da:40; C_conv:12100; LangID:1; C0:9.15; SRIX:0.03; |
| 231.21.0675.013 Type 21/750.1 Standard 5 Slewing Ring Bearings | Ca min.:5 mm; Fatigue load limit Pu:40.5 kN; Db min.:167 mm; Calculation factor Y0:0.9; Mass bearing:4.84 kg; Calculation factor e:0.35; Da min.:156 mm; da max.:108 mm; Basic dynamic load rating C:372 kN; Cb min.:10.5 mm; Reference speed:3000 r/min; C:34 mm; Da max.:167.5 mm; r3,4 min.:3 mm; db min.:100.5 mm; D:180 mm; Basic static load rating C0:365 kN; d1 ≈:126.57 mm; Limiting speed:3800 r/min; |
| S10-63E1 Rotek Slewing Ring Bearings | Basic static load rating C0:17300 kN; Design variant/feature:TQOS/GWISI; Calculation factor Y0:2; r1,2 min.:1 mm; Thrust factor K:1.76; D:615.95 mm; d1 ≈:505 mm; Basic dynamic load rating C:5610 kN; Calculation factor Y1:2; Fatigue load limit Pu:1290 kN; T:402.05 mm; Mass bearing:290 kg; Comparative radial load rating CF:1500 kN; d:482.6 mm; B:402.05 mm; Comparative axial load rating CFa:243 kN; |
| 162.16.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Pa:43.6 kN; Labyrinth ring:2 x LOR 141; P150°:113 kN; A1:171.45 mm; End plug (suffix Y):EPR 18; Cap bolt:1-8 UNC; PosiTrac Plus contact element:2 x B10724-140; S:4.763 mm; ba:74.612 mm; Max. speed for PosiTrac Plus seal:950 r/min; R1:115.888 mm; P60°:345 kN; Ca:95.809 mm; Housing:SSAFS 534; P180°:133 kN; H2:69.85 mm; PG:1/4 NPT; Stabilizing ring:SR-34-0; Mass pillow block:168 kg; da:152.4 mm; |
| 230.20.0400.503 Type 21/520. Standard 5 Slewing Ring Bearings | SREX:0.02; d:5; DA_:2.381; B1:5; DE_:11.881; SRI:1.33; C0r:52; DI_:7.119; fo:12.725; db:6.9; rb:0.2; Z_:7; hidTable:ecat_NSESBM; B_:5; C0:0.505; SRIX:0.02; GRS rpm:38000; SDM_:9.5; KBRG:6191; D_:14; |
| No. | Brand | M | U | G | C | B | S | b | h |
| 3R6-79P9 | Rotek | - | - | - | 55.5 | - | - | - | - |
| R9-55E3 | Rotek | - | - | - | - | - | 4.763 mm | - | 28.575 mm |
| 230.21.0475.013 Type 21/520. | Standard 5 | - | - | - | - | 59.531 mm | 0.794 mm | - | - |
| 161.25.0764.891.21.1503 | Standard 5 | - | - | - | - | 27 mm | - | - | - |
| 62.20.0560.001.21.1503 | Standard 5 | - | - | - | 133 | - | - | - | - |
| 230.20.0600.503 Type 21/750. | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0800.013 Type 21/950. | Standard 5 | - | - | - | - | 69.85 mm | 0.794 mm | - | - |
| 3R16-197N1 | Rotek | - | - | - | - | 22 mm | - | - | - |
| 161.16.0400.890.11.1503 | Standard 5 | - | - | - | - | 42.9 mm | - | - | - |
| 230.20.0500.013 Type 21/650. | Standard 5 | - | - | - | 25 mm | 31 mm | - | - | - |
| 231.20.0400.013 Type 21/520.1 | Standard 5 | - | - | - | - | 86 mm | - | 13.9 mm | - |
| 62.20.0414.500.01.1503 | Standard 5 | - | - | - | - | - | 0.794 mm | - | - |
| 62.20.0710.000.11.1503 | Standard 5 | - | - | M 58x1.5 | - | 44 mm | - | - | - |
| 62.20.0450.000.11.1503 | Standard 5 | - | - | M 65x2 | - | 15 mm | - | - | - |
| 61.20.0560.100.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R13-122N1B | Rotek | - | - | - | 450 | - | - | - | - |
| 62.25.0855.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R10-98N1B | Rotek | - | - | Tr 600x6 | - | - | - | - | - |
| 161.20.0450.890.11.1503 | Standard 5 | - | - | - | - | 350 mm | - | - | 232.5 mm |
| 3R10-125P1B | Rotek | - | - | - | - | - | - | - | - |
| 162.16.0560.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| L9-49P9Z | Rotek | - | - | - | - | 126 mm | - | - | - |
| 60.20.0644.575.01.1403 | Standard 5 | - | - | - | 161 | - | - | - | - |
| 60.25.1055.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | 36.513 mm |
| 162.16.0450.891.21.1503 | Standard 5 | - | - | 299.339 mm | - | 39.954 mm | - | - | - |
| 250.15.0375.013 Type 13/4 | Standard 5 | - | - | - | - | 69.85 mm | 0.794 mm | - | - |
| 161.16.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | 46.831 mm |
| 3R10-88N2B | Rotek | - | - | - | - | - | - | - | - |
| 230.20.0500.503 Type 21/650. | Standard 5 | - | - | - | - | 17 mm | - | - | - |
232.21.0875.013 Type 21/950.2 Standard 5 Slewing Ring Bearings Video
China Slewing Ring Bearings for Steel Mills (281.30.1200.013
232.21.0875.013 (Type 21/950.2) 232.21.0975.013 (Type 21/1050.2) 232.21.1075.013 (Type 21/1200.2) 282.30.0900.013 (Type 110/1100.2) 282.30.1000.013
Rothe Erde Slewing Ring Bearings - Turntable Bearings | Lily
232.20.0700.503 Type 21/850.2, 744, 848, 649,2. 230.21.0875.013 Type 21/950.0, 844, 947 − 0,14, 735 + 0,13. 232.21.0875.013 Type 21/950.2, 844, 947 − 0,
China Light Bearing Slewing Ring Bearing Turntable Bearing
... Bearing Turntable Bearing Ball Bearing Internal Gear Bearing Flanged Bearing (232.21.0975.013 (Type 21/1050.2)), Find ... 232.21.0875.013 (Type 21/950.2)
Rothe Erde Slewing Bearing - Algomtl
232.21.0775.013 Typ 21/850.2 232.21.0875.013 Typ 21/950.2 232.21.0975.013 Typ 21/1050.2 232.21.1075.013 Typ 21/1200.2. Standard bearing type 110,
Buy Rothe Erde Slewing Ring Bearing Ungeared with Single
Similar Slewing Bearing 3, 232.21.0875.013 Typ 21/950.2, Similar Slewing ... Slewing Ring Bearing for Butterfly Type Ladle Turret 191.50.5000.990.41.1502
Rothe Erde Slewing Bearings - Rotek Inc
After Sales Service. 006 thyssenkrupp Rothe Erde GmbH 016 Bearing types ... 232.20.0800.013. Type 21/950.2. 844 ... 232.21.0875.013. Type 21/950.2. 844
232.21.0875.013 Type 21/950.2 Rothe erde slewing bearing
D. 2.4375 in compatible cone: 3655, 3659 cup width: 0.9375 in abma precision rating: Class 2 single or double cup: Single Cup lubrication hole type: No Hole
RothErde slewing bearing Luoyang JCB Bearing Technology
Standard bearing type 21, Bearing with limited clearance. Without gear ... Typ 21/850.2. –0,14. 232.21.0875.013. 844. 61,6. 947. 737,6. 56. Typ 21/950.2. –0,14
230.20.0800.503 (Type 21/950.0) Rothe Erde Ball Slewing
Apr 4, 2019 - 230.20.0800.503 (Type 21/950.0) Rothe Erde Ball Slewing Ring Bearings. ... 232.21.0875.013 (Type 21/950.2) 232.21.0975.013 (Type
Rothe erde slewing bearing standard KD210
Rothe erde slewing bearing standard KD210--Standard bearing type 21,standard number of bolt ... 232.21.0875.013Typ 21/950.2, 844, 61,6, 947, 737,6, 56