| A10-110P2D Rotek Slewing Ring Bearings | d:320 mm; r1,2 min.:2 mm; B:19 mm; d1:396 mm; Mass shaft washer:6.35 kg; |
| R9-63N3 Rotek Slewing Ring Bearings | d:420 mm; G:Tr 440x5; Mass withdrawal sleeve:29 kg; Hydraulic nut:HMV 88 E; G2:G 1/4; B2:252 mm; A:9 mm; G1:30 mm; B1:230 mm; d1:400 mm; |
| 60.22.0575.502.11.1503 Standard 5 Slewing Ring Bearings | C1 max.:18 mm; d2 max.:65 mm; G:M 24x2; Basic dynamic load rating C:48 kN; l3 min.:36 mm; w:30 mm; h1:94 mm; l7 min.:30 mm; B:20 mm; l4 max.:128 mm; d:25 mm; r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:90 kN; Mass rod end:0.65 kg; d4 ≈:35 mm; Material constant KM:330; l5 ≈:18 mm; dk:35.5 mm; α:7 °; |
| 3R10-125P1B Rotek Slewing Ring Bearings | L:70 mm; A:30 mm; Basic static load rating C0:7.8 kN; R1:20.5 mm; A5:18 mm; Da:63.5 mm; B4:4.75 mm; J6:81 mm; Basic dynamic load rating C:14 kN; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A1:12 mm; Mass bearing unit:0.62 kg; Fatigue load limit Pu:0.335 kN; Recommended tightening torque for grub screw:4 N·m; B1:44.4 mm; J:99 mm; s1:26.9 mm; J7:12 mm; RG:1/4-28 UNF; |
| R11-71N3 Rotek Slewing Ring Bearings | Mass bushing:0.032 kg; D:25 mm; d:18 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; B:20 mm; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; |
| 3R6-55E9 Rotek Slewing Ring Bearings | l2 max.:199 mm; l1 min.:86 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:100 kN; Material constant KM:330; C1 max.:24 mm; r1 min.:0.6 mm; d:40 mm; l7 min.:46 mm; d2 max.:94 mm; h:150 mm; Basic static load rating C0:140 kN; α:7 °; dk:53 mm; B:28 mm; Mass rod end:1.85 kg; G:M 39x3; |
| 162.25.0886.890.11.1503 Standard 5 Slewing Ring Bearings | Oil rpm:5000; r1:1; SBRG:19; D_a:210; hidTable:ecat_NSANGB; D_:220; a:39.4; r:2; B_:28; mass:3.1; C0:133; yobi:7932C; KBRG:7014; ALP21:15; Prod_Type3:ACBB_SR_C; fo:16.7; C_conv:106000; C:106; DI_:172.436; SRI:9.08; |
| 3R8-59N2E Rotek Slewing Ring Bearings | Da:279.999 mm; P60°:226 kN; Cap bolt recommended tightening torque:203.4 N·m; da:114.3 mm; H2:66.675 mm; RG:3/4 NPT; Cap bolt:4 x 3/4-10 UNC; PG:1/4 NPT; H1:169.875 mm; A1:158.75 mm; Eye bolt:2 x 3/8-16 UNC; Ca:102.794 mm; H:336.55 mm; J max.:488.95 mm; L:558.8 mm; Stabilizing ring:SR-0-26; R2:33.337 mm; Housing:SAF 626; Max. speed for PosiTrac Plus seal:1300 r/min; A2:222.25 mm; |
| 3R6-55N9 Rotek Slewing Ring Bearings | m0:0.698; D_b:119; Oil rpm:9000; fo:14.6; D_:125; mass:2.48; DI_:79.933; B_:24; SREX:0.065; r:1.5; ALPHA_:15; r1:1; SBRG:2; rb:1; ra:1.5; DE_:114.909; LangID:1; Prod_Type3:ACBB_SR_MM_DB; SRI:9.08; SRIX:0.065; |
| 161.16.0560.890.11.1503 Standard 5 Slewing Ring Bearings | d:90; SBRG:10; ra:1.5; Prod_Type3:ACBB_SR_MM_DT; Oil rpm:4300; SREX:0.065; LangID:1; r1:1; C:109; ALP21:30; C0:133; r:1.5; C_conv:109000; D_a:131; DI_:99.817; SDM_:114.987; m0:0.599; B_:24; DE_:130.157; mass:2.38; |
| A16-79P1A Rotek Slewing Ring Bearings | r1:1.5; ra:3; Oil rpm:2200; mass:17.6; SRI:21.46; SRE:21.46; DI_:198.283; GRS rpm:1600; d:170; SREX:0.16; ALP21:40; yobi:7234B; m0:1.645; hidYobi:7234B; C:266; SBRG:2; DE_:281.677; DA_:41.275; D_a:292; a:126.7; |
| 162.25.0764.890.11.1503 Standard 5 Slewing Ring Bearings | DE_:151; C_conv:355000; hidYobi:NUP2316EM; Oil rpm:4000; db max:98; d:80; dc min:105; db min:91; LangID:1; D_:170; DA_:25; C0:430; SBRG:23; KBRG:4165; TSR rpm:4500; DI_:101; Z_:13; D_a max:159; ra:2; da:91; |
| No. | Brand | M | U | G | C | B | S | b | h |
| 61.20.0644.500.01.1503 | Standard 5 | - | - | - | - | 26 mm | - | - | - |
| 230.20.0400.503 Type 21/520. | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0844.500.01.1503 | Standard 5 | - | - | - | - | 95 mm | - | - | - |
| 161.20.0710.891.21.1503 | Standard 5 | - | - | - | 48.5 | - | - | - | - |
| 3R6-63N9 | Rotek | - | - | - | - | 45 mm | - | - | - |
| 3R6-79P9 | Rotek | - | - | - | 55.5 | - | - | - | - |
| 3R10-98P9 | Rotek | 5 mm | - | - | 50 mm | - | - | 9.5 mm | - |
| A18-89P1 | Rotek | - | - | - | - | 65.484 mm | 0.794 mm | - | - |
| 61.20.0414.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R10-85N2A | Rotek | - | - | - | - | - | - | - | 49.212 mm |
| 231.21.0475.013 Type 21/520.1 | Standard 5 | - | - | - | - | 53 mm | - | - | - |
| L9-57N9Z | Rotek | - | - | - | 36 mm | 54 mm | - | 6.2 mm | - |
| 3R6-79E9 | Rotek | - | - | Tr 750x7 | - | - | - | - | - |
| 60.20.0414.575.01.1403 | Standard 5 | - | - | - | 19 mm | - | - | - | - |
| 250.15.0400.013 Type 13/5 | Standard 5 | - | - | - | 80 mm | 106 mm | - | - | - |
| L9-49E9Z | Rotek | - | - | - | - | - | - | - | - |
| 232.20.0800.503 Type 21/950.2 | Standard 5 | - | - | - | - | 16 mm | - | - | 17 mm |
| 60.22.0660.001.11.1503 | Standard 5 | - | - | - | - | 100 mm | - | - | - |
| 3R8-98P9 | Rotek | - | - | - | - | - | - | - | 36.513 mm |
| 231.21.0875.013 Type 21/950.1 | Standard 5 | - | 10 mm | - | - | - | - | - | - |
| 161.20.0560.890.11.1503 | Standard 5 | - | - | - | - | - | 4.763 mm | - | 34.925 mm |
| 61.20.0544.500.01.1503 | Standard 5 | - | - | - | - | 16 mm | - | - | - |
| 3R16-245N1 | Rotek | - | - | - | 240 | - | - | - | - |
| 3R6-63P9 | Rotek | 3 mm | - | - | 25 mm | 40 mm | - | 4.6 mm | - |
| W13-49P1 | Rotek | - | - | - | 705 | - | - | - | - |
| 62.20.0630.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.20.0544.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
231.21.0875.013 Type 21/950.1 Standard 5 Slewing Ring Bearings Video
China Slewing Ring Bearings for Steel Mills (281.30.1200.013
231.21.0875.013 (Type 21/950.1) 231.21.0975.013 (Type 21/1050.1) 231.21.1075.013 (Type 21/1200.1) 281.30.0900.013 (Type 110/1100.1) 281.30.1000.013
slewing bearing crane slewing ring wind turbine pitch bearing
slewing bearing crane slewing ring wind turbine pitch bearing 231.21.0875.013 type 21/950.1, US $ 100 - 10000 / Set, Slewing Bearing, Building Material Shops
231.21.0875.013 Type 21/950.1 bearing, Light load slewing
high quantities 231.21.0875.013 Type 21/950.1 Bearing dimension: 735x950.4x56, Enquiry for global 231.21.0875.013 Type 21/950.1 Light load slewing
230.20.0800.503 (Type 21/950.0) Rothe Erde Ball Slewing
Apr 4, 2019 - 231.21.0875.013 (Type 21/950.1) 231.21.0975.013 (Type 21/1050.1) 231.21.1075.013 (Type 21/1200.1) 281.30.0900.013 (Type 110/1100.1)
for Truck Crane, Excavator, Excavating Machine, Wind
231.21.0875.013 (Type 21/950.1) 231.21.0975.013 (Type 21/1050.1) 231.21.1075.013 (Type 21/1200.1) 281.30.0900.013 (Type 110/1100.1) 281.30.1000.013
Rothe Erde Slewing Bearings - Rotek Inc
After Sales Service. 006 thyssenkrupp Rothe Erde GmbH 016 Bearing types ... 231.20.0800.013. Type 21/950.1. 844 ... 231.21.0875.013. Type 21/950.1. 844
Rothe Erde Slewing Bearing - Algomtl
Standard bearing type 21, standard number of bolt holes ... 231.21.0775.013 Typ 21/850.1 231.21.0875.013 Typ 21/950.1 231.21.0975.013 Typ 21/1050.1
China Triple Row Slewing Ring Bearing for Steel Plant
231.20.0800.013 (Type 21/950.1), 231.20.0800.503 (Type 21/950.1), 231.21.0875.013 (Type 21/950.1), 281.30.1300.013 (Type 110/1500.1), 281.30.1375.013
Buy 231.21.0875.013 Type 21/950.1 Rothe erde slewing bearing
Buy 231.21.0875.013 Type 21/950.1 Rothe erde slewing bearing from PT GREAT MACHINE ENGINEERING，Cylindrical roller slewing bearing Distributor
RothErde slewing bearing Luoyang JCB Bearing Technology
Standard bearing type 21, Bearing with limited clearance. Without gear ... Typ 21/850.1. +0,13. 231.21.0875.013. 844. 65.1. 950.4. 735. 56. Typ 21/950.1. +0,13