| 60.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | with cylindrical bore:430 min-1; Pu:5600 kN; D:720 mm; Oil:765.770 kN; Dynamic (Cr):12 mm; d:440 mm; with tapered bore:530 min-1; Grease:10640 kN; rs (min):6 mm; Static (Cor):22.3 mm; B:226 mm; |
| 61.20.0644.575.01.1403 Standard 5 Slewing Ring Bearings | Ca min.:4.2 mm; Da max.:520 mm; Mass bearing + sleeve:190 kg; ra max.:4 mm; d1:300 mm; B1:226 mm; s1 max.:26.7 mm; db min.:338 mm; B5:56 mm; D1 ≈:477 mm; d3:400 mm; Reference speed:900 r/min; D:540 mm; Fatigue load limit Pu:480 kN; Ba min.:13 mm; d2 ≈:371 mm; Limiting speed:1300 r/min; r1,2 min.:5 mm; Basic dynamic load rating C:4150 kN; B2:42 mm; |
| 230.20.0600.013 Type 21/750. Standard 5 Slewing Ring Bearings | SRIX:0.065; r1:1; Oil rpm:5300; C0:87; d:45; SBRG:3; m0:0.698; C:103; ao:16.9; GRS rpm:4000; SRE:9.08; Prod_Type3:ACBB_SR_MM_DF; DA_:17.462; hidYobi:7309AWDF; 2B_:50; LangID:1; hidTable:ecat_NSANGB; SDM_:72.494; ALP21:30; Z_:12; |
| 60.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings | da:80 mm; Da:140 mm; ba:34.131 mm; N1:19.05 mm; J min.:244.475 mm; Taconite seal (db shaft position):TER 82; R2:21.431 mm; PG:1/8 NPT; Stabilizing ring:SR-16-13; P150°:44.5 kN; L:330.2 mm; A1:88.9 mm; H2:31.75 mm; Mass pillow block:20 kg; P180°:52.5 kN; P90°:82.7 kN; J1:53.975 mm; Cap bolt:2 x 5/8-11 UNC; J max.:279.4 mm; db:92.075 mm; |
| 162.20.0630.890.11.1503 Standard 5 Slewing Ring Bearings | r1,2 min.:6.4 mm; T:419.1 mm; Calculation factor Y2:3; d1 ≈:495 mm; Fatigue load limit Pu:1430 kN; Comparative radial load rating CF:1930 kN; Comparative axial load rating CFa:313 kN; D1 ≈:563 mm; Calculation factor e:0.33; Thrust factor K:1.76; B:479.96 mm; Calculation factor Y0:2; Basic static load rating C0:19300 kN; Calculation factor Y1:2; d:415.925 mm; r3,4 min.:1.5 mm; D:590.55 mm; |
| 162.25.0764.891.21.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:21.6 kN; Da:119.1 mm; Recommended diameter for attachment bolts, mm G:14 mm; s1:26.5 mm; B1:44 mm; T:50.5 mm; A1:14 mm; Housing:FY 509 M/VZ033; Basic dynamic load rating C:33.2 kN; J:105 mm; J6:123 mm; A:39 mm; Recommended tightening torque for grub screw:7.4 N·m; N4:4 mm; Db2:112 mm; Hexagonal key size for grub screw N:3 mm; Thread grub screw G2:M6; Housing material:Cast iron; |
| 61.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | Mass inner ring:0.0076 kg; r, r1,2 min.:0.3 mm; d:12 mm; B:16 mm; F:15 mm; |
| 250.14.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:84.5 kN; J min.:174.625 mm; B:73.025 mm; Limiting speed:4100 r/min; J max.:180.975 mm; S:0.794 mm; da:49.212 mm; Attachment bolt diameter G:15.875 mm; s:25.4 mm; L:225.425 mm; H1:57.15 mm; d2:73.819 mm; A1:80.169 mm; A:63.5 mm; Mass bearing unit:4.76 kg; H2:33.337 mm; H:114.3 mm; |
| 161.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | d:340 mm; rs (min):5 mm; Pu:2320 kN; D:520 mm; with tapered bore:600 min-1; B:133 mm; Static (Cor):22.3 mm; with cylindrical bore:500 min-1; Oil:338.560 kN; Dynamic (Cr):12 mm; Grease:4330 kN; |
| 230.21.0575.013 Type 21/650. Standard 5 Slewing Ring Bearings | rs (min):5 mm; Pu:2950 kN; Oil:432.570 kN; Static (Cor):22.3 mm; d:420 mm; with tapered bore:450 min-1; D:620 mm; Dynamic (Cr):12 mm; with cylindrical bore:380 min-1; B:150 mm; Grease:5850 kN; |
| 250.15.0475.013 Type 13/5 Standard 5 Slewing Ring Bearings | C:22 mm; da min.:173 mm; Mass bearing (including seat washer where applicable):12.5 kg; ra max.:1 mm; D1 ≈:123 mm; s:63 mm; H1:80 mm; Minimum load factor A:5; Basic static load rating C0:980 kN; Da max.:165 mm; Fatigue load limit Pu:28.5 kN; D:210 mm; H:74.1 mm; Limiting speed:1400 r/min; Reference speed:1000 r/min; Basic dynamic load rating C:325 kN; D2:165 mm; d1 ≈:205 mm; D3:220 mm; |
| 230.20.0400.013 Type 21/520. Standard 5 Slewing Ring Bearings | Mass bearing:3.95 kg; Limiting speed:2800 r/min; Basic static load rating C0:530 kN; Calculation factor Y:1.8; rb max.:2 mm; B:38 mm; Da max.:198.5 mm; a:35.761 mm; d1 ≈:177.8 mm; Ca min.:7 mm; d:150 mm; Calculation factor Y0:1; T:38 mm; Calculation factor e:0.33; D:210 mm; Da min.:194 mm; Db min.:202 mm; da max.:163 mm; Fatigue load limit Pu:52 kN; r1,2 min.:2.5 mm; |
| No. | Brand | M | U | G | C | B | S | b | h |
| 3R8-88P9 | Rotek | - | - | - | - | - | - | - | - |
| 3R10-85N2A | Rotek | - | - | - | - | - | - | - | 49.212 mm |
| 3R8-59N2C | Rotek | - | - | - | - | - | - | - | - |
| H8-58E2 | Rotek | - | - | - | - | - | 4.763 mm | - | 34.925 mm |
| 62.20.0710.001.21.1503 | Standard 5 | - | - | Tr 800x7 | - | 90 mm | - | 55 mm | 25 mm |
| 162.16.0450.891.21.1503 | Standard 5 | - | - | 299.339 mm | - | 39.954 mm | - | - | - |
| 62.20.0844.500.01.1503 | Standard 5 | - | - | - | - | 95 mm | - | - | - |
| A16-59N2 | Rotek | - | - | - | - | - | - | - | - |
| 61.20.0544.500.01.1503 | Standard 5 | - | - | - | - | 16 mm | - | - | - |
| 3R6-79E9 | Rotek | - | - | Tr 750x7 | - | - | - | - | - |
| 60.45.0805.001.11.1504 | Standard 5 | - | - | - | - | 26 mm | - | - | - |
| 231.20.0600.013 Type 21/750.1 | Standard 5 | - | - | - | 110 | - | - | - | - |
| A10-110P2D | Rotek | - | - | - | - | 19 mm | - | - | - |
| 62.20.0544.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0630.100.11.1503 | Standard 5 | - | - | Tr 400x5 | - | - | - | - | - |
| S22-140E1 | Rotek | - | - | - | - | 33 mm | - | mm | - |
| 60.20.0544.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.16.0450.890.11.1503 | Standard 5 | - | - | - | 16 mm | 19 mm | - | - | - |
| A16-152E2 | Rotek | - | 32 mm | - | - | - | - | - | - |
| S12-70E1 | Rotek | - | - | - | - | - | - | - | - |
| 3R6-55N9 | Rotek | - | - | - | - | - | - | - | - |
231.21.0775.013 Type 21/850.1 Standard 5 Slewing Ring Bearings Video
Rothe Erde Slewing Bearing - Algomtl
Standard bearing type 21, standard number of bolt holes ... 231.21.0775.013 Typ 21/850.1 231.21.0875.013 Typ 21/950.1 231.21.0975.013 Typ 21/1050.1
China Slewing Ring Bearings for Steel Mills (281.30.1200.013
231.21.0475.013 (Type 21/520.1) 231.21.0575.013 (Type 21/650.1) 231.21.0675.013 (Type 21/750.1) 231.21.0775.013 (Type 21/850.1) 231.21.0875.013 (Type
for Truck Crane, Excavator, Excavating Machine, Wind
231.21.0475.013 (Type 21/520.1) 231.21.0575.013 (Type 21/650.1) 231.21.0675.013 (Type 21/750.1) 231.21.0775.013 (Type 21/850.1) 231.21.0875.013 (Type
Rothe Erde Slewing Bearings - Rotek Inc
After Sales Service. 006 thyssenkrupp Rothe Erde GmbH 016 Bearing types ... 231.20.0700.013. Type 21/850.1. 744 ... 231.21.0775.013. Type 21/850.1. 744
Product Categories - Wanda Slewing Bearing Supplier of
231.21.0775.013 Type 21/850.1 slewing rings without gear: Brand Name : INA: Model Number : SL192316. 062.20.0710.000.11.1503 slewing rings without gear
China Light Types Flanged Slewing Ring Bearings Turtable
China Light Types Flanged Slewing Ring Bearings Turtable Bearing 110/1300 for Truck, Find details about China Slewing ... 231.21.0775.013 (Type 21/850.1)
Rothe Erde Slewing Ring Bearings - Turntable Bearings | Lily
231.21.0775.013 Type 21/850.1, 744, 838,8, 635 + 0,13. 230.21.0775.013 Type 21/850.0, 744, 847 − 0,14, 635 + 0,13. 232.21.0775.013 Type 21/850.2, 744
Rothe Erde® Slewing Bearings.
Except for Standard series KD 210, types 13 and 21. Table 1. Service Time ... Typ 21/850.1. 231.20.0800.013. Typ 21/ ... 231.21.0775.013. Typ 21/850.1. 231.21
230.20.0800.503 (Type 21/950.0) Rothe Erde Ball Slewing
Apr 4, 2019 - 230.20.0800.503 (Type 21/950.0) Rothe Erde Ball Slewing Ring Bearings. ... 231.21.0775.013 (Type 21/850.1) 231.21.0875.013 (Type
RothErde slewing bearing Luoyang JCB Bearing Technology
Standard bearing type 21, Bearing with limited clearance. Without gear ... Typ 21/750.1. +0,11. 231.21.0775.013. 744. 53.5. 838.8. 635. 56. Typ 21/850.1. +0,13