| 161.20.0450.890.11.1503 Standard 5 Slewing Ring Bearings | h:232.5 mm; Mass bushing:23.2 kg; Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; B:350 mm; Tolerance shaft:e7; a:17.5 mm; α:124 °; Permissible sliding velocity v max.:0.5 m/s; D:250 mm; Permissible sliding velocity v min.:0 m/s; d:230 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; |
| 61.20.0400.101.21.1503 Standard 5 Slewing Ring Bearings | Cap bolt:4 x 1 1/2-6 UNC; H1:250.825 mm; P120°:249 kN; da:252.412 mm; Labyrinth ring:2 x LOR 607; R1:163.512 mm; Da:419.999 mm; P90°:400 kN; End plug (suffix Y):X-5217-2; Initial grease fill:3515.4 g; ba:100.806 mm; L:869.95 mm; R2:50.8 mm; PG:1/4 NPT; A2:317.5 mm; Cap bolt, SAE grade:8; P60°:669 kN; Ca:147.803 mm; Mass pillow block:392 kg; Cap bolt recommended tightening torque:4284.4 N·m; |
| S16-100E1 Rotek Slewing Ring Bearings | P60°:185 kN; h:51.594 mm; Max. speed for Taconite seal:900 r/min; S:4.763 mm; RG:1/2 NPT; Da:215.001 mm; Ca:82.804 mm; N1:22.225 mm; L:419.1 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:1220 N·m; Stabilizing ring:SR-24-20; P90°:111 kN; PG:1/4 NPT; H1:133.35 mm; Cap bolt:2 x 1-8 UNC; Taconite seal:TER 102; P120°:72.5 kN; A2:254 mm; P180°:81.4 kN; |
| 3R8-88N9 Rotek Slewing Ring Bearings | B_:78; r1:2; r:5; d:190; Z_:12; D_:400; ra:4; C_conv:730000; hidYobi:7338ADT; DE_:358.868; KBRG:7324; SREX:0.21; D_a:378; SDM_:295; GRS rpm:1100; LangID:1; hidTable:ecat_NSANGB; DI_:231.132; mass:95; Oil rpm:1500; |
| 62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | GRS rpm:6700; TSR rpm:7500; KBRG:4165; d:40; mass:0.778; db min:48; SBRG:3; LangID:1; db max:50; DA_:14; D_a max:82; Oil rpm:8000; Prod_Type3:CRB_SR_NUP; r:1.5; DI_:52; SDM_:66; dc min:55; Z_:12; C_conv:83000; Macha rpm:10000; |
| 60.45.0805.001.11.1504 Standard 5 Slewing Ring Bearings | d:95 mm; Mass inner ring:0.31 kg; F:105 mm; B:26 mm; r, r1,2 min.:1 mm; |
| 60.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | with cylindrical bore:430 min-1; Pu:5600 kN; D:720 mm; Oil:765.770 kN; Dynamic (Cr):12 mm; d:440 mm; with tapered bore:530 min-1; Grease:10640 kN; rs (min):6 mm; Static (Cor):22.3 mm; B:226 mm; |
| S8-50E1 Rotek Slewing Ring Bearings | RG:3/8 NPT; S:4.763 mm; L:330.2 mm; Housing:SSAFS 517; Cap bolt, SAE grade:8; Labyrinth ring:2 x LOR 52; P180°:32 kN; P90°:47.2 kN; Pa:9.25 kN; ba:35.719 mm; P150°:26.7 kN; da:73.025 mm; Da:150 mm; H2:38.1 mm; H:187.325 mm; A2:127 mm; R2:22.225 mm; Stabilizing ring:SR-17-14; R1:53.975 mm; Initial grease fill:110.56 g; |
| 231.20.0500.503 Type 21/650.1 Standard 5 Slewing Ring Bearings | Recommended diameter for attachment bolts, mm G:12 mm; Rα:45 °; A5:24.5 mm; Fatigue load limit Pu:0.655 kN; s1:25.4 mm; J7:15 mm; B:42.9 mm; A:34.5 mm; A3:3.2 mm; N4:2 mm; H:156 mm; Db2:96 mm; Recommended tightening torque for grub screw:6.5 N·m; J:130 mm; J6:106 mm; GN:1/4-28 SAE-LT; R1:22 mm; Basic dynamic load rating C:25.5 kN; L:96 mm; Limiting speed:5300 r/min; |
| A10-110P2D Rotek Slewing Ring Bearings | d:320 mm; r1,2 min.:2 mm; B:19 mm; d1:396 mm; Mass shaft washer:6.35 kg; |
| A18-60P1B Rotek Slewing Ring Bearings | d:100; KBRG:4155; db min:111; Prod_Type3:CRB_SR_NJ; D_a max:169; DA_:22; C:249; GRS rpm:3600; DI_:119; SDM_:141; DE_:163; Z_:17; D_:180; hidTable:ecat_NSCLDR; r:2.1; SBRG:2; r1:2.1; mass:3.88; rb:2; yobi:NJ220EM; |
| 161.16.0400.890.11.1503 Standard 5 Slewing Ring Bearings | Recommended diameter for attachment bolts, inch G:0.5 in; J:92 mm; A5:22 mm; Recommended tightening torque for grub screw:4 N·m; Fatigue load limit Pu:0.655 kN; T:46.4 mm; s1:25.4 mm; B:42.9 mm; d:35 mm; Housing material:Composite; A3:3.2 mm; Hexagonal key size for grub screw N:3 mm; Mass bearing unit:0.68 kg; A1:17 mm; Recommended diameter for attachment bolts, mm G:12 mm; N:14.8 mm; A:35 mm; |
| No. | Brand | M | U | G | C | B | S | b | h |
| H8-54N1 | Rotek | - | - | Tr 400x5 | - | 52 mm | - | - | - |
| R11-79N3 | Rotek | - | - | M 45x3 | - | 35 mm | - | - | - |
| S22-140E1 | Rotek | - | - | - | - | 33 mm | - | mm | - |
| 3R13-122N1B | Rotek | - | - | - | 450 | - | - | - | - |
| A19-150P1 | Rotek | - | - | - | - | 185.738 mm | - | - | - |
| 162.16.0450.891.21.1503 | Standard 5 | - | - | 299.339 mm | - | 39.954 mm | - | - | - |
| R11-75N3 | Rotek | - | - | - | - | - | - | 8 mm | - |
| 162.16.0450.890.11.1503 | Standard 5 | - | - | - | 122 | - | - | - | - |
| 3R6-63E9 | Rotek | - | - | - | - | 65.484 mm | 0.794 mm | - | - |
| 3R13-62N1E | Rotek | - | - | - | - | - | - | - | 42.069 mm |
| 60.25.0475.000.11.1504 | Standard 5 | - | - | - | 137 | - | - | - | - |
| 62.20.0844.500.01.1503 | Standard 5 | - | - | - | - | 95 mm | - | - | - |
| 161.25.0886.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 59.531 mm |
| 61.20.0744.575.01.1403 | Standard 5 | - | - | - | - | - | - | 16.7 mm | - |
| 3R10-98P9 | Rotek | 5 mm | - | - | 50 mm | - | - | 9.5 mm | - |
| 3R6-48E3B | Rotek | - | - | - | - | - | - | - | 60.325 mm |
| R11-75E3 | Rotek | - | - | - | - | - | - | - | - |
| 3R16-265E1 | Rotek | - | - | M 45x3 | - | 35 mm | - | - | - |
| R11-71N3 | Rotek | - | - | - | - | 20 mm | - | - | - |
| A12-48E12 | Rotek | - | - | - | - | 330 mm | - | - | - |
| R8-46E3 | Rotek | - | - | - | 22 mm | 51.6 mm | - | - | - |
| 61.20.0644.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| A12-125P1 | Rotek | - | - | - | 305 | - | - | - | - |
| 231.20.0500.503 Type 21/650.1 | Standard 5 | - | - | - | - | 42.9 mm | - | - | - |
| A24-107N1 | Rotek | - | - | - | - | 10 mm | - | - | - |
| 231.21.0775.013 Type 21/850.1 | Standard 5 | - | - | M 80x4 | - | 55 mm | - | - | 295 mm |
| R8-49E3 | Rotek | - | - | - | - | 53 mm | - | - | - |
| 161.20.0450.891.21.1503 | Standard 5 | - | - | - | - | 133 mm | - | - | - |
| 250.14.0400.013 Type 13/5 | Standard 5 | - | - | - | - | 73.025 mm | 0.794 mm | - | - |
| 231.20.0400.013 Type 21/520.1 | Standard 5 | - | - | - | - | 86 mm | - | 13.9 mm | - |
230.20.0500.503 Type 21/650. Standard 5 Slewing Ring Bearings Video
Rothe Erde Slewing Bearings - Rotek Inc.
21/650. − 0,5 mm. + 0,5 mm. Type 21/750 ... 21/950. − 0,6 mm. + 0,6 mm. Type 21/1050 ... 21/1200. − 0,7 mm ... 230.20.0500.503. Type 21/650.0.
230.20.0500.503 Type 21/650.0 Four-point contact ball slewing ...
Buy 230.20.0500.503 Type 21/650.0 Four-point contact ball slewing rings from Turbine Bearing Supplier，Thyssenkrupp Rothe Rrde Slewing Bearing Distributor ...
Buy 230.20.0500.503 Type 21/650.0 slewing rings without gear ...
230.20.0500.503 Type 21/650.0 slewing rings without gear ; Number of Tapered Rows: Double Row ; Component: Assembly ; Bore: 3 Inch | 76.2 Millim ; Flange Outside ...
Rothe Erde® Slewing Bearings.
Except for Standard series KD 210, types 13 and 21. Table 1. Service Time ... 21/ 650. –0.5 mm. +0.5 mm. Type 21/ 750 ..... 21/ 950 ... 230.20.0500.503.194 pages
230.20.0500.503 Type 21/650.0 - Slewing Ring Bearings ...
LYMC bearings are the perfect alternative to the most common and well-known brands.
230.20.0500.503 Type 21/650.0 转盘轴承
230.20.0500.503 Type 21/650.0 转盘轴承- 23系列, 球, 无齿轮, 内环内径: 434 mm, 外环外径: 648 mm, 更多关于230.20.0500.503 Type 21/650.0的详细信息在我们的网站 ...类型: 球重量: 30.4 Kg
230.20.0500.013 Type 21/650.0 Slewing Ring Bearings
230.20.0500.013 Type 21/650.0 Slewing Ring Bearings ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 434 mm ; Outside Diameter Of Outer Ring, 648 ...
230.20.0500.503 Type 21/650.0 - BSPD Bearing Manufacturing
230.20.0500.503 Type 21/650.0 ; Distance at top Outer ring/inner ring(Ho), 10,5 ; Attachment ; Outside bole-hole circle diameter (La), 620 ; Number of holes on ...Diameter(C): 505Diameter(O): 542,5Diameter(A): 583Diameter(U): 545,5
230.20.0500.503 Type 21/650.0 Four-point contact ball slewing ...
Size. 42x80x46 mm. Bore Diameter. 42 mm. Outer Diameter. 80 mm. Width. 46 mm d. 42 mm. D. 80 mm. B. 46 mm. Powered by TCPDF (www.tcpdf.org). Page 1/1.
230.20.0500.503 Type 21/650.0 Rothe erde slewing ring ...
230.20.0500.503 Type 21/650.0 Rothe erde slewing ring ; Weight / Kilogram: 0.39 ; Preload: Medium ; Width: 1.26 Inch | 32 Milli ; Harmonized Tariff Code: 8482.10.