| R9-67N3 Rotek Slewing Ring Bearings | s1:25.8 mm; T:49.8 mm; Rα:45 °; Recommended diameter for attachment bolts, mm G:14 mm; Da:98.4 mm; Basic static load rating C0:21.6 kN; J7:18 mm; R1:24.5 mm; Limiting speed:4300 r/min; J6:120.5 mm; Db2:111 mm; SWN:7 mm; H:178.5 mm; L:111 mm; Fatigue load limit Pu:0.915 kN; Db1:102 mm; N4:2 mm; Basic dynamic load rating C:33.2 kN; GN:1/4-28 SAE-LT; A5:26.5 mm; |
| A10-47E1 Rotek Slewing Ring Bearings | Recommended diameter for attachment bolts, mm G:10 mm; Recommended diameter for attachment bolts, inch G:0.375 in; L:86 mm; Hexagonal key size for grub screw N:3 mm; Db:59 mm; Recommended tightening torque for grub screw:4 N·m; Mass bearing unit:0.31 kg; A5:18.5 mm; Housing material:Composite; s1:26.6 mm; d:20 mm; N:12.3 mm; A1:15 mm; T:45.6 mm; A3:3.2 mm; Da:68.3 mm; Basic dynamic load rating C:12.7 kN; |
| 60.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | with cylindrical bore:430 min-1; Pu:5600 kN; D:720 mm; Oil:765.770 kN; Dynamic (Cr):12 mm; d:440 mm; with tapered bore:530 min-1; Grease:10640 kN; rs (min):6 mm; Static (Cor):22.3 mm; B:226 mm; |
| 161.16.0630.890.11.1503 Standard 5 Slewing Ring Bearings | dd min:40; DE_:54; SBRG:3; B_:17; Macha rpm:15000; d:25; DA_:10; SDM_:44; rb:1; Fw:34; Prod_Type3:CRB_SR_NUP; dc min:37; KBRG:4165; TSR rpm:11000; C0:37.5; db min:31.5; r:1.1; mass:0.282; C_conv:41500; LangID:1; |
| 62.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:186 kN; R:140 mm; Mass bearing (including seat washer where applicable):4.85 kg; Fatigue load limit Pu:17 kN; D1 ≈:133 mm; Da max.:160 mm; D2:160 mm; d:130 mm; r1,2 min.:1.5 mm; C:17 mm; Limiting speed:1800 r/min; H1:53 mm; H:47.9 mm; D:190 mm; d1 ≈:187 mm; Minimum load factor A:1.8; Reference speed:1300 r/min; s:67 mm; D3:195 mm; ra max.:1 mm; |
| 60.35.0680.000.11.1503 Standard 5 Slewing Ring Bearings | P150°:222 kN; P90°:400 kN; N1:41.275 mm; H:495.3 mm; Cap bolt, SAE grade:8; Pa:82.7 kN; S:4.763 mm; Da:419.999 mm; Eye bolt:2 x 1/2-13 UNC; P180°:267 kN; A2:379.425 mm; RG:1 NPT; da:182.563 mm; Ca:147.803 mm; P60°:669 kN; P120°:249 kN; J max.:749.3 mm; Cap bolt:4 x 1 1/2-6 UNC; H1:250.825 mm; Cap bolt recommended tightening torque:4284.4 N·m; |
| 3R8-68N3B Rotek Slewing Ring Bearings | dk:105 mm; Mass rod end:15 kg; l3 min.:85 mm; Material constant KM:330; Basic static load rating C0:655 kN; h1:295 mm; B:55 mm; r1 min.:1 mm; l5 ≈:45 mm; d2 max.:182 mm; l7 min.:88 mm; G:M 80; d:80 mm; Basic dynamic load rating C:400 kN; w:90 mm; Specific dynamic load factor K:100 N/mm²; C1 max.:48 mm; d4 ≈:105 mm; l4 max.:389 mm; α:5 °; |
| 232.21.0775.013 Type 21/850.2 Standard 5 Slewing Ring Bearings | LangID:1; r:2; C_conv:72500; SBRG:2; DE_:129.05; Z_:10; d:80; DI_:90.95; KBRG:6101; SREN:-0.04; mass:1.42; hidYobi:6216; Prod_Type3:DGBB_SR_OT; SRIX:0.04; SREX:0.04; C0:53; SRIN:-0.04; D_:140; C:72.5; yobi:6216; |
| A18-89E1 Rotek Slewing Ring Bearings | Reference speed:2000 r/min; Dw:7 mm; d:40 mm; Basic dynamic load rating C:95 kN; D:78 mm; Limiting speed:4000 r/min; Eb:77 mm; Ea:44 mm; Basic static load rating C0:365 kN; Fatigue load limit Pu:36.5 kN; Roller and cage thrust assembly:K 89308 TN; Mass roller and cage thrust assembly:0.098 kg; |
| 231.20.0700.013 Type 21/850.1 Standard 5 Slewing Ring Bearings | P150°:236 kN; L:831.85 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:4284.4 N·m; RG:1 NPT; P60°:691 kN; H:473.075 mm; Initial grease fill:2749.95 g; H1:241.3 mm; P120°:260 kN; P180°:285 kN; P90°:414 kN; A2:311.15 mm; Housing:SSAFS 544; A1:222.25 mm; Cap bolt:1 1/2-6 UNC; R2:46.831 mm; PG:1/4 NPT; Stabilizing ring:SR-44-38; da:200.025 mm; |
| 3R8-59N2E Rotek Slewing Ring Bearings | Da:279.999 mm; P60°:226 kN; Cap bolt recommended tightening torque:203.4 N·m; da:114.3 mm; H2:66.675 mm; RG:3/4 NPT; Cap bolt:4 x 3/4-10 UNC; PG:1/4 NPT; H1:169.875 mm; A1:158.75 mm; Eye bolt:2 x 3/8-16 UNC; Ca:102.794 mm; H:336.55 mm; J max.:488.95 mm; L:558.8 mm; Stabilizing ring:SR-0-26; R2:33.337 mm; Housing:SAF 626; Max. speed for PosiTrac Plus seal:1300 r/min; A2:222.25 mm; |
| 161.16.0560.890.11.1503 Standard 5 Slewing Ring Bearings | d:90; SBRG:10; ra:1.5; Prod_Type3:ACBB_SR_MM_DT; Oil rpm:4300; SREX:0.065; LangID:1; r1:1; C:109; ALP21:30; C0:133; r:1.5; C_conv:109000; D_a:131; DI_:99.817; SDM_:114.987; m0:0.599; B_:24; DE_:130.157; mass:2.38; |
| No. | Brand | M | U | G | C | B | S | b | h |
| R11-79N3 | Rotek | - | - | M 45x3 | - | 35 mm | - | - | - |
| 61.20.0560.100.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R8-98E9 | Rotek | - | - | M 100x2 | - | 60 mm | - | - | - |
| 232.20.0700.013 Type 21/850.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.20.0544.500.01.1503 | Standard 5 | - | - | - | - | 226 mm | - | - | - |
| 61.25.0764.103.11.1504 | Standard 5 | - | - | - | - | 7 mm | - | - | - |
| 3R8-110N1 | Rotek | - | - | - | - | 21 mm | - | - | - |
| A16-78E4 | Rotek | - | - | - | - | 22 mm | - | - | - |
| 162.25.0886.890.11.1503 | Standard 5 | - | - | - | 106 | - | - | - | - |
| 231.20.0500.013 Type 21/650.1 | Standard 5 | - | - | - | 24500 | - | - | - | - |
| 12.18.0748.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0800.013 Type 21/950. | Standard 5 | - | - | - | - | 69.85 mm | 0.794 mm | - | - |
| 3R8-79P9 | Rotek | - | - | - | - | - | - | - | - |
| 231.20.0700.503 Type 21/850.1 | Standard 5 | - | - | - | - | 272 mm | - | 22.3 mm | - |
| 162.25.0764.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0500.013 Type 21/650. | Standard 5 | - | - | - | 25 mm | 31 mm | - | - | - |
| A16-86P1 | Rotek | - | - | - | - | 85.725 mm | 0.794 mm | - | - |
| 232.20.0600.013 Type 21/750.2 | Standard 5 | - | - | - | 31 | - | - | - | - |
| 162.25.0764.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A16-67P2 | Rotek | - | - | - | - | 49.2 mm | - | - | - |
| 61.20.0744.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
A24-119E11A Rotek Slewing Ring Bearings Video
Rotek slewing ring bearing , Rotek slewing bearing for forestry
A24-119E11A, A16-152E2. A8-17N4D, A8-22N2A, A8-25N2, A9-25N3, A10-32N1A, A14-33N1, A10-35N1L, A12-35N5, A7-38N1, A10-43N28D, A13-46N1A,
Rotek Series 3000 slewing bearing-MANUFACTUTERE OF
A18-89E1, 4381, 99.8, 78.38, 6.62. A22-105E2A, 4773, 117.082, 95.06, 6. A19-111E1, 3565, 122.079, 103.7, 5.04. A24-119E11A, 5050, 129.067, 111.19, 6.75
Rotek series slewing ring Luoyang JCB Bearing Technology
99.800. 78.38. 6.62. A18-89E1. 117.082. 95.06. 6.00. A22-105E2A. 122.079. 103.70. 5.04. A19-111E1. 129.067. 111.19. 6.75. A24-119E11A. 162.519. 145.08
A24-119E11A Material piling machine bearing price, RFQ A24
A24-119E11A Material piling machine bearing price Suppliers Catalogue, China A24-119E11A Material piling machine bearing price manufacturers is good in
Rotek brand slewing ring bearing , forestry machinery slewing
A16-53E1A, A18-60E2, A18-74E3, A16-78E4, A18-80E1, A18-89E1, A22-105E2A, A19-111E1, A24-119E11A, A16-152E2 A8-17N4D, A8-22N2A, A8-25N2,
Rotek Brand Slewing Ring Bearing , Forestry Machinery
... A10-47E1, A12-48E12, A14-48E22 A16-53E1A, A18-60E2, A18-74E3, A16-78E4, A18-80E1, A18-89E1, A22-105E2A, A19-111E1, A24-119E11A, A16-
Luoyang Jiawei Bearing Manufacturing CO.,LTD
A24-119E11A, A16-152E2 Internal Gears A8-17N4D, A8-22N2A, A8-25N2, A9-25N3, A10-32N1A, A14-33N1, A10-35N1L, A12-35N5, A7-38N1, A10-43N28D,
Rotek slewing turntable bearing , amusement Ferris Wheel
A24-119E11A,A16-152E2 Internal Gears A8-17N4D,A8-22N2A,A8-25N2,A9-25N3,A10-32N1A,A14-33N1,A10-35N1L,A12-35N5, A7-38N1,A10-43N28D
Large-Diameter Anti-Friction Slewing Rings - Rotek Inc
A24-119E11A. 129.067 111.19. -. 118.77. 118.91. 6.75. 6.50. 5.88 5050. 3,700,000. 8,390,000. A16-152E2. 162.519 145.08. 159.45 151.77. 152.88. 6.50. 5.51
Cross-Compatible Slewing Ring Bearing - SlewPro
A19-111E1. 30E.2815.60.000. A24-119E11A. 30E.3019.76.000. A16-152E2. 30E.3869.51.000. 2D 3D PDF REQUEST DRAWING. A8-17N4D. 30N.0422.25.000