| A20-72N5A Rotek Slewing Ring Bearings | Limiting speed:1800 r/min; R:125 mm; D3:175 mm; Reference speed:1300 r/min; da min.:142 mm; Mass bearing (including seat washer where applicable):5.95 kg; D:170 mm; H:59.2 mm; H1:64 mm; d:100 mm; Basic dynamic load rating C:225 kN; D1 ≈:103 mm; D2:135 mm; Fatigue load limit Pu:18.3 kN; C:18 mm; s:46 mm; r1,2 min.:1.5 mm; d1 ≈:170 mm; Da max.:135 mm; ra max.:1 mm; |
| 231.20.0700.013 Type 21/850.1 Standard 5 Slewing Ring Bearings | P150°:236 kN; L:831.85 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:4284.4 N·m; RG:1 NPT; P60°:691 kN; H:473.075 mm; Initial grease fill:2749.95 g; H1:241.3 mm; P120°:260 kN; P180°:285 kN; P90°:414 kN; A2:311.15 mm; Housing:SSAFS 544; A1:222.25 mm; Cap bolt:1 1/2-6 UNC; R2:46.831 mm; PG:1/4 NPT; Stabilizing ring:SR-44-38; da:200.025 mm; |
| 3R10-82E3C Rotek Slewing Ring Bearings | G:Tr 1000x8; d3:1140 mm; G2:G 1/8; Hydraulic nut:HMV 200E; B:100 mm; Mass adapter sleeve assembly:470 kg; B1:430 mm; d:1000 mm; G3:13 mm; B5:125 mm; A:10 mm; d1:950 mm; |
| 161.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | d:340 mm; rs (min):5 mm; Pu:2320 kN; D:520 mm; with tapered bore:600 min-1; B:133 mm; Static (Cor):22.3 mm; with cylindrical bore:500 min-1; Oil:338.560 kN; Dynamic (Cr):12 mm; Grease:4330 kN; |
| 162.20.0710.891.21.1503 Standard 5 Slewing Ring Bearings | G:M 80; l5 ≈:45 mm; Basic dynamic load rating C:400 kN; d4 ≈:105 mm; l4 max.:389 mm; Mass rod end:15 kg; d2 max.:182 mm; α:6 °; Specific dynamic load factor K:100 N/mm²; C1 max.:48 mm; h1:295 mm; d:80 mm; r1 min.:1 mm; Material constant KM:330; Basic static load rating C0:655 kN; l7 min.:88 mm; w:90 mm; dk:105 mm; l3 min.:85 mm; B:55 mm; |
| 161.20.0630.891.21.1503 Standard 5 Slewing Ring Bearings | r1:1; SRE:9.49; C:102; rb:1; ra:1.5; SRIX:0.08; mass:1.7; d:45; ao:85.8; ALPHA_:40; SRI:9.49; DE_:90.944; DI_:54.056; Prod_Type3:ACBB_SR_MM_DB; m0:0.724; KBRG:7131; hidTable:ecat_NSANGB; C_conv:97000; da:54; hidYobi:7309BEAWDB; |
| 230.20.0600.503 Type 21/750. Standard 5 Slewing Ring Bearings | d:65; C_conv:180000; B_:33; ALPHA_:30; yobi:7313AWDB; SDM_:102.5; LangID:1; DE_:126.45; da:77; ao:92.2; DA_:23.812; D_b:133; r1:1.1; SREX:0.08; ALP21:30; Prod_Type3:ACBB_SR_MM_DB; hidYobi:7313AWDB; r:2.1; SRE:12.38; rb:1; |
| 3R16-220N1 Rotek Slewing Ring Bearings | r1:0.15; Z_:12; SRE:2.06; SBRG:19; yobi:7902CTYN; C0:2.64; GRS rpm:38000; C_conv:4750; mass:0.016; ALP21:15; SDM_:21.5; DE_:25.475; hidYobi:7902CTYN; r:0.3; DA_:3.969; m0:0.151; ALPHA_:15; da:17.5; Prod_Type3:ACBB_SR_C; B_:7; |
| S8-50E1 Rotek Slewing Ring Bearings | RG:3/8 NPT; S:4.763 mm; L:330.2 mm; Housing:SSAFS 517; Cap bolt, SAE grade:8; Labyrinth ring:2 x LOR 52; P180°:32 kN; P90°:47.2 kN; Pa:9.25 kN; ba:35.719 mm; P150°:26.7 kN; da:73.025 mm; Da:150 mm; H2:38.1 mm; H:187.325 mm; A2:127 mm; R2:22.225 mm; Stabilizing ring:SR-17-14; R1:53.975 mm; Initial grease fill:110.56 g; |
| 162.20.0630.891.21.1503 Standard 5 Slewing Ring Bearings | P90°:149 kN; PG:1/4 NPT; H2:60.325 mm; R2:38.1 mm; RG:3/4 NPT; Labyrinth ring:2 x LOR 138; Cap bolt, SAE grade:5; P120°:94.3 kN; J max.:441.325 mm; N1:28.575 mm; P60°:249 kN; H1:152.4 mm; P180°:103 kN; Housing:SAF 034 KA; Mass pillow block:63.9 kg; J min.:396.875 mm; Pa:34 kN; Ca:86.614 mm; A2:193.675 mm; da:147.637 mm; |
| 61.20.0400.100.11.1503 Standard 5 Slewing Ring Bearings | db max:36; dc min:40; Z_:13; Fw:37.5; rb:0.6; da:35; SBRG:2; d:30; C0:37.5; SDM_:46.5; mass:0.217; D_:62; DI_:37.5; Oil rpm:12000; ra:1; hidTable:ecat_NSCLDR; DE_:55.5; Macha rpm:14000; r:1; LangID:1; |
| 62.20.0400.000.11.1503 Standard 5 Slewing Ring Bearings | Mass bearing:0.51 kg; da min.:76 mm; db max.:81.7 mm; Basic static load rating C0:45.5 kN; B:20 mm; d2:82.3 mm; D:110 mm; db min.:76 mm; Calculation factor f1:1; Calculation factor fHC:1.02; r1,2 min.:1.1 mm; Static axial stiffness, preload class A:90 N/µm; da max.:81.7 mm; Attainable speed for grease lubrication:15000 r/min; Ball diameter Dw:12.7 mm; Static axial stiffness, preload class C:173 N/µm; |
| No. | Brand | M | U | G | C | B | S | b | h |
| 231.21.0875.013 Type 21/950.1 | Standard 5 | - | 10 mm | - | - | - | - | - | - |
| 3R6-63N9 | Rotek | - | - | - | - | 45 mm | - | - | - |
| 162.20.0560.890.11.1503 | Standard 5 | - | - | - | - | 80 mm | - | - | 101.5 mm |
| 60.22.0575.502.11.1503 | Standard 5 | - | - | M 24x2 | - | 20 mm | - | - | - |
| 61.20.0710.100.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A14-89P1 | Rotek | - | - | - | 128 mm | - | - | - | - |
| 230.20.0400.503 Type 21/520. | Standard 5 | - | - | - | - | - | - | - | - |
| 3R16-265E1 | Rotek | - | - | M 45x3 | - | 35 mm | - | - | - |
| 231.21.0675.013 Type 21/750.1 | Standard 5 | - | - | - | 34 mm | 41 mm | - | - | - |
| 231.20.0400.013 Type 21/520.1 | Standard 5 | - | - | - | - | 86 mm | - | 13.9 mm | - |
| R8-49N3 | Rotek | - | - | - | - | - | - | - | 73.025 mm |
| 62.20.0710.001.21.1503 | Standard 5 | - | - | Tr 800x7 | - | 90 mm | - | 55 mm | 25 mm |
| 60.20.0644.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| S16-112E1 | Rotek | - | - | - | 100 mm | 130 mm | - | - | - |
| L9-53P9Z | Rotek | - | - | - | - | 20.5 mm | - | - | - |
| 61.20.0414.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0400.503 Type 21/520.1 | Standard 5 | - | - | - | - | 31 mm | - | - | - |
| 3R10-85N2A | Rotek | - | - | - | - | - | - | - | 49.212 mm |
| 60.22.0370.301.11.1504 | Standard 5 | - | - | - | 31.5 | - | - | - | - |
| 232.20.0400.503 Type 21/520.2 | Standard 5 | - | - | - | 365 | - | - | - | - |
| 62.25.0855.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0844.500.01.1503 | Standard 5 | - | - | - | - | 95 mm | - | - | - |
| A16-56N5 | Rotek | - | - | M 42x3 | - | 32 mm | - | - | 163 mm |
| 60.25.0555.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.18.0748.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0450.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.21.0475.013 Type 21/520.1 | Standard 5 | - | - | - | - | 53 mm | - | - | - |
| A22-129N1 | Rotek | - | - | - | - | 46 mm | - | 8.3 mm | - |
| 3R8-110N1 | Rotek | - | - | - | - | 21 mm | - | - | - |
A16-59N2 Rotek Slewing Ring Bearings Video
Rotek Brand Slewing Ring Bearing , Forestry Machinery
... A12-35N5, A7-38N1, A10-43N28D, A13-46N1A, A12-47N3E, A14-47N5A, A9-54N2, A14-54N10C, A16-59N2 A20-72N5A, A18-80N1, A16-95N6, A20-95N4,
A16-59N2 slewing ring bearings with internal gear - JCB
Page 1. Luoyang JCB Bearing Technology Co., Ltd
Rotek series slewing ring Luoyang JCB Bearing Technology
A16-56N5. 66.22. 49.700. 4.25. 1400. A16-59N2. 79.94. 61.600. 5.12. 2159. A20-72N5A. 89.00. 70.267. 4.88. 2425. A18-80N1. 100.25. 88.960. 5.00. 1825
A16-59N2 slewing ring bearings with internal gear - JCB
Page 1. Luoyang JCB Bearing Technology Co., Ltd
Rotek slewing turntable bearing , amusement Ferris ...
A7-38N1,A10-43N28D,A13-46N1A,A12-47N3E,A14-47N5A,A9-54N2,A14-54N10C,A16-59N2 A20-72N5A,A18-80N1,A16-95N6,A20-95N4,A24-107N1
CRB60040 Thin-section Crossed Roller Bearing 600x700x40mm
A16-59N2 Four Point Contact Ball Slewing Bearing With Inernal Gear; It is widely used in hoister transportation, mining, architecture, shipping mechanism, radar
A16-59N2 - Rotek Slewing Rings Online Catalog | Lily Bearing
Find details about A16-59N2 slewing rings, Choose from our selection of rotek bearings, including over 800 products in a wide range of styles and sizes
Luoyang Jiawei Bearing Manufacturing CO.,LTD
... A12-35N5, A7-38N1, A10-43N28D, A13-46N1A, A12-47N3E, A14-47N5A, A9-54N2, A14-54N10C, A16-59N2 A20-72N5A, A18-80N1, A16-95N6, A20-95N4,
Large-Diameter Anti-Friction Slewing Rings - Rotek Inc
A16-59N2. 66.22. 49.700. 52.27. 59.21. 59.30. 4.25. 3.88 3.88 1400. 2,230,000. 2,520,000. A20-72N5A. 79.94. 61.600. 64.25. 71.95. 72.06. 5.12. 4.75 4.75 2159
A16-59N2 - Rotek Slewing Rings Online Catalog | Lily Bearing
Find details about A16-59N2 slewing rings, Choose from our selection of rotek bearings, including over 800 products in a wide range of styles and sizes